Drying Technology | DESIGN INNOVATION CENTER

Fabrication of Dome is done.

Posted by Shubham S | Feb 28, 2019 | CAPD, Current Projects, Student, Student Projects, Updates

Design of new tray structure

Posted by Shubham S | Feb 17, 2019 | Uncategorized

CAD for Dome Dryer v2.1

Posted by Shubham S | Feb 15, 2019 | Activities, CAPD, Current Projects, Student, Student Projects, Updates

Design of Dome Dryer v2.0

Posted by Shubham S | Sep 15, 2018 | CAPD, Current Projects, Discussions, Regular, Student, Student Projects

Fabrication of Dome is done.

Feb 28, 2019

Fabrication of dome of the Dome Dryer v2.1 system is almost finished. The primer coat of dome is done.

Design of new tray structure

Feb 17, 2019

After a series of trials conducted on version 2.0, I took a feedback from user Girija. The data...

CAD for Dome Dryer v2.1

Feb 15, 2019

This time for CAD modeling of Dome dryer I have used parameteric modeling to develop a scalable...

The thought behind the selection of dome structure for a Solar Food Dryer is its high efficiency to capture solar energy. Also, the higher volume for a given surface gives us a lot of volume for the food product. The challenge is to integrate both of these parameters and develop a Solar Food Dryer for Domestic and Commercial use.

First full load test #Methi

Feb 11, 2017

Tier one performed successfully in the full load test. 14.9 Kg of Methi leaves were loaded over all the trays. The fan was full time ON. Methi was dried in 24 hours after loading.The final weight of methi was 1.8 kgMethi...

Tag: Drying Technology