Objective : To fix the table plywood for incinerator machine
Maretial: plywood,measure tape, pencil,plywood cutter,jig saw,planer,screws,drilling machine,screw socket and thinner.
Length of table: 4ft.
Width: 3 ft.
Procedure:
- First observed some models of tables.
- Took the measurement of table stand
- Then found out the plywood
- Marked the given dimension on plywood with the help of marker and measure tape
- jig saw and plywood cutter was used to cut the plywood
- The vibrator was used to plane the side surface of the plywood
- Selected the screw on the basis of size of the plywood and metal bar
- Marked the points on which the screw fit
- The screw was fitted in the plywood and metal bar with the help of the drilling machine with screw socket
- After fitting the plywood was cleaned with the thinner .
