AEROPONICS V1.3

Now we are done with small prototypes. We made prototype for taking trial of Aeroponics. For understanding & working of Aeroponics.

Now we are decided to make some big system. We are going to design system for 48 Spinach plants.

For refer previous version kindly go through this link—>http://vadic.vigyanashram.blog/2019/11/14/aeroponics/

So to achieve this we are using 200 liter barrel.

image 1.3.1- 200 ltr barrel

We made 48 uniform lines using grinder.

image 1.3.2-cutting

With the help of hot air gun & bamboo stick we have created holes.

image 1.3.3-making holes using hot air gun

To get to know to create such holes using hot air gun please go through this link—–>https://youtu.be/K4789gqRNls

image 1.3.4-complete structure
image 1.3.5-Fogger

While making this structure we have planted spinach seeds in tray.

image 1.3.6-spinach plants after 3 days.

Now complete assembly on 31-12–2019.

image 1.3.8-Prototype V1.3

Proper pipe fitting is one of the current issue. Water pressure is more because of that pipe is forcefully get removed.

Holes of fogger nozzle is very tiny and pressure is also high that’s why its creating to much problems. and another problem is that plants cups are facing towards ground side and fogger is at top side so all cups are not getting sufficient water. ultimately plants are died.

image 1.3.9-4 days after plantation

Plants grown well for few days

So, to overcome that I decided to change fogger.