Need of project

A small hydroponic system is to be made because it is easy to make and look simple . We will design table top hydroponic system in ATL lab project and its costing will be less

Objective

To design simple and easy fabricate hydroponic system for decorative purpose.

SYSTEM DESIGN

I decide table top hydroponic in bubbler system . This may be the most simple hydroponic system .

Material list

Material Quantity
PVC Pipe53 cm
End cap 2
Small pots3
Acrylic sheet 53cm* 10cm

Diameter of pipe is 3 inch

Length of pipe is 53 cm

Diameter of pot holes is 5cm.

Different between two pots is 5 cm

  1. Firstly Cut the pipe to 53 cm and joined the end cap
  2. Driiling the 5 cm holes

Figure No – drilling the holes

3.Spray colour gave colour to the system

Figure No – colouring the system

4. Making stand in 3d printer . The stand was First designed in AUTODECSK fusion 360

Figure No – design of stand

5. After uploading the design flash print software ,the 3D printer was allowed to print .

6. After making ath stand ,the dimension and design of the acrylic sheet was made in RD works software and it was cut on the laser cutter

Figure N0- acrylic sheet uploading in laser cutter
Figure No – System done

7. After the system is ready ,bubbler is connected to it.

8. Shevanti plant was planted in the system.