Introduction :
The Water Wheel Hydroponic System is a rotating hydroponic setup where plants grow without soil using nutrient-rich water. The system is currently under development and aims to provide equal water, nutrients, and oxygen to all plants through continuous rotation.
1.Base Structure Preparation
A tank is being used as the nutrient reservoir, and a supporting frame has been prepared.
2.Wheel Installation
Bicycle wheels have been mounted and connected using a shaft to create the rotating mechanism. Tank is used as the base reservoir, and two bicycle wheels are mounted on a central shaft. A metal frame supports the structure and keeps the wheels aligned. This setup forms the foundation of the rotating system, which will later be used to hold plant pots and enable smooth rotation.
Objectives :
To design a rotating system for 16 plant pots
To achieve rotation at ~1 RPM
To ensure equal nutrient distribution
Methodology :
Bicycle wheel is used as rotating structure
Scrap tank is used as DWC base
Motor will be used for rotation
Pots will be arranged evenly
Current Status :
The basic structure has been completed and installed inside the polyhouse. It can properly accommodate 20 pots.
Structure are complete
Conclusion :
The wheel is not rotating smoothly and experiences sudden jerks at certain points. Due to these jerks, some water falls downward, reducing the overall efficiency of the system. Further improvements in wheel alignment and water flow distribution are required for smooth and continuous operation.
