6/08/2022
There are many things we saw which really not complete scrap we can reuse it again. We checked all scrap and think about which scraps can be exactly repairable.
8/08/2022
Suvarna mam gave us work of repairing of cupboard. Firstly I tried to loose nuts with spinner but nuts are rusted so then we used grinder to cut it.
22/08/2022
we polished cupboard parts with polish paper and then with grinder, to remove unwanted color present on plates. Today I learned to use grinder for polishing. Grinder shows better result than polishing paper in case of polishing metal plates, but while operating grinder we need to decide that how much portion or layer we going to polish.
30/08/2022
Today we polished all remaining plates and angles of cupboard then painted it with primary color.
31/08/2022
Today we painted plates and angles of cupoard with main colour
Bill of material:
| No | Material | Cost per piece | Cost |
| 1 | Metal sheet | 56.25/ft | 717.09 |
| 2 | L angle | 85/kg | 680 |
| 3 | Nut bolt | 50 (nut and bolt) | 56 |
| 4 | Flat wisher | 50 | 30 |
| 5 | Primer(500 ml) | 100 | 100 |
| 6 | Blue colour(500 ml) | 150 | 150 |
| 7 | Thinner | 80 | 80 |
| 8 | Rubber feet | 4 | 40 |
| Total cost | 1853.19 |
Conclusion:
- Learned to use grinder,
- we can renew old rack by polishing, grinding.
- while operating grinder we should follow some instructions
