Sewing Machine
Panel – Charge controller – DC Motor
Panel= 100 watt
Batter= 12V , 40AH
Specification
- PMDCM= Permant Magnet DC Motor
- Charge Controller Type= PWM (Pluse With Modulation)
Revolution Per Minute
Increasing no of pole = Increasing RPM
Solar Pumping
300 watt = 72 cell
1 cell =160mm*160mm
panel connection in series
flow of water= 23.65
Drive
Drive Efficiency = Pump Sharp Power/Motor Power
Efficiency Output Pump-
Pump Efficiency= Efficiency output pump /Pump sharp power
N(overall) = n(pump) * n (drive)
Solar powered water pumps can deliver drinking water as well as water for livestock or irrigation purposes. Solar water pumps may be especially useful in small scale or community based irrigation, as large scale irrigation requires large volume of water volumes of water that in turn require a large solar PV array.
A photovaltaic solar powered pump system has three parts
1 Solar panels
2 The Controller (using MPPT)
3 The Pump
Charge Controller– In solar pumping using charge controller. Charge controller having two types 1. Pulse with modulation
2. Maximum power point Tracking
In these system using MPPT ( Maximum Power Point Tracking) charge controller. MPPT charge controller using large scale system. for example – Solar pump, PWM( Pulse With Modulation) charge controller using small scale system. for example – Sewing machine, Milky machine
The Size of the PV- system is directly dependent on the size of the pump, the amount of the water that is required and solar irradiance available.
Inverter in 5 KVA
we use mppt charge controller .
POWER FACTOR : KW/KVA
battery capacity ; 96v and 150Ah
1 panel = 250w we use 10 panels and 5-5 panel are connected in series & both panels are connected in parallel .
5 panel voltage : 36*5=180v
power : 250*5= 1250w
current = 6.940
parallel current : 13.88