We selected one old cupboard from scrap which can be repair.

Bill of material

Sr.NoMaterialCost per pieceTotal cost of material
1MS sheet56.25 Rs/square feet1546
2L angle 95 Rs/kg600
3Nut-bolt4Rs/piece200
4Flat wisher’s5030
5Primer (500ml)100100
6Blue color (500ml)150150
7Thinner8080
8Rubber feet440
Total2750
BILL OF MATERIAL
CUPBOARD

How to clean the cupboard

  • Use dry cloth to remove the dust and insects.
  • Use water to clean properly the dust in the scratches of ms sheet.
  • Use dry cloth to remove unwanted water drops to prevent from the rust.
CLEANING WITH THE HELP OF CLOTH

How to separate the parts

  • Use the perfect size spinner to open the nut and bolts prevent from any injury.
  • Separate out all ms sheet and L angles.
REMOVE THE OLD SCREW

How to remove the rust

  • Acidic solutions such as lemon juice and vinegar, along with a little bit of salt applied to the rusted areas, are another DIY method of rust removal from your tools. Leave for a few hours then remove.
  • Use the grinder to remove the rust in deep scratches of ms sheet.
  • Use sand paper or polish paper to clean the rust.
  • Polish the metal sheet with the help of polish paper for prevent from unwanted scratches.
POLISH WITH THE HELP OF POLISH PAPER

How to remove the bend

  • Use rubber hammer to prevent from major damage to ms sheet.
  • Hammering with the help of wooden hammer to remove the major bends.

How to Paint Cupboard

Step 1. Choose your perfect fit Cupboard

  • This step is for the one who wants to design their newly purchased almirah.
  • Choosing an ideal fit almirah means firstly decide the space where you want to put your almirah. 
  • Take the measurements and purchase one accordingly. 
  • While purchasing an almirah, check the quality and durability.

Step 2. Prepare the steel cupboard for painting

  • Before anything, check the Cupboard and remove everything from it. 
  • Once you have an empty cabinet, clean with a damp cloth and a dry cloth.
  • With the help of sandpaper remove rust from inside and outside of the cabinet. 
  • Sanding helps new paint to stick better and gives a very smooth effect on the cabinet. 

Step 3. Select your paint

  •  Choose the paint according to space and area where you want to put  your cabinet.
  • We’ll suggest using special spray paint for painting on steel as the spray paints are more convenient and easy to apply.
  • For better results, one can also buy a primer for metals. The primer removes the rust from the cabinet and prevents from future stains.
APPLY PRIMER
APPLY COLOUR

Step 4. Paint separately

  • It is advisable to paint the L angle separately from the ms sheet. 

Step 5. Spray paint and prime

  • Before painting, you need to keep the metal plates and L angles separately.  
  • First, use the spray in color you prefer and let it dry thoroughly.
  • After the paint gets dry use a primer spray on it.
  • At the back of the primer bottle you’ll find its drying time.

Step 6. Put things back

  • After once you are done with painting, it’s time to put the under shadow.
  • Once you set the Cupboard, give time to the paint to dry down and a night to set the paint.