E-Rickshaw Maintenance.

08/02/2022

We maintain the E-Rickshaw which is Made by Kinetic Company PVT.LTD

Problem:-We noticed that the front wheel is vibrating.

The bearing of the front wheel of the E-rickshaw was damaged.

To solve the problem, we removed the wheel and checked the bearing.

As the bearing was damaged, we contacted Prashant Sir of Vardhaman Automobile and as per his instructions, we removed the bearing wheel.

Then we put the wheel in that position and took the trial then the trial passed successfully.

Conclusion:-The test passed successfully.

10/02/2022

Then we maintain the E-Rickshaw throttle.

As the throttle in the E-rickshaw was not working properly, we contacted Prashant Sir in Vardhaman Automobile and we did as he said.

He said that Throttle checking, it was understood that the spring was cut.

Then we told Prashant Sir that the spring was cut.

Then they said that the spring was not available at that time .

So we postponed the repair.

17/02/ 2022
Problem:-There is some issue in GPS system.

The GPS is not working properly. Our senior Vrushabh told us about GPS and also he helps us to checking the system.

We visited we checked one by one with the help of voltmeter then we found some issue in that as like loose connection and some body touch then we fixed it properly taking help of silicon and insulation tape.

Conclusion:-Now it’s fine to tracking the location as before.

10 April

We inspected both rickshaws but the problems were different.

We replaced the front brake cable as it was damaged and also polished the brake liner.Then we opened the rear wheel and checked the brake liner it was rusty inside so the brakes didn’t work, so we bought a WD40 spray to de-brake the brake liner from the alignment of the frame.

We then polished the liner with the help of polished paper and removed the rust with the help of WD40 spray.

Then we adjusted the brakes and tested it and it was perfect. We replaced the old oil with new oil and added 500 ml of oil.

Conclusion– The brakes and speed of the rickshaw were not working properly after servicing. The rear wheel on the left did not fit in the alignment and the brake liner was rubbing the inner plate so the wheel drum was getting hot, so it got hot.

21 May

Problem:- We don’t know the reason why the rickshaw stopped.

Then we called customer care and explained the problem of the rickshaw.

Customer Care says we will come there and check what happened to the rickshaw and let you know.

Then they come and check the e-rickshaw and they find that the controller is broken and so they tell us to change the controller and we will send it to you next week.